Internet leży na dnie.

Internet leży na dnie.

To prawda. I nie chodzi w tym stwierdzeniu o samą zawartość internetu: zboczenia, przemoc, zło, pornografię, narkotyki i wszystko inne, z czego internetowi należy poczynić zarzuty. Idzie tu o stronę techniczną. Na dnie mórz i oceanów leży prawie milion kilometrów kabli światłowodowych zasilających www.

Za każdym razem, gdy odwiedzasz stronę internetową lub wysyłasz e-mail, dane są wysyłane i odbierane przez skomplikowany system sieci kablowej, który rozciąga się na całym świecie.

Początki sięgają 1850 roku, kiedy jeszcze o internecie nikomu się nie śniło, ale wtedy zaczęło się układanie kabli przez oceany, aby uzyskać lepszą komunikację między ludźmi.

Obecnie istnieją setki tysięcy kilometrów kabli światłowodowych służących do przesyłania danych między narodami.

Wszyscy chętnie korzystamy z Internetu, ale kto zastanawia: jak to działa?

Czemu kładzie się tak kosztowne kable światłowodowe, łatwe do uszkodzenia, skoro podobno krąży w Kosmosie ponad 20 tysięcy satelitów?

PS. Chcesz te kable zobaczyć na mapie? Proszę bardzo:http://www.submarinecablemap.com/

Nathanel

Źródło: http://alexjones.pl/aj/aj-technologia-i-nauka/item/68888-internet-lezy-na-dnie

How to fix Foscam C1 camera motion detection (working behind the window glass)

How to fix Foscam C1 camera motion detection (working behind the window glass)

Finally Foscam released unofficial beta firmware for the Foscam C1 camera. In this firmware they added human detector option, so the camera motion detector is able to work behind the window glass. Simply You can disable that option and simultaneously is disabled the PIR sensor. You don’t need to do any hardware changes described in my previous post but I’ll keep that description if the firmware wouldn’t work for any reason. To flash the camera firmware You must use System/Path Installation from the camera web menu.

Here is link for new beta firmware (You are using that on Your risk, but I flashed my 2 cameras and they are working fine):

Foscam beta firmware

 

(Hardware modification if firmware above wouldn’t work well)

Foscam C1 camera is well made camera, packet with many cool features like 115 degrees view angle, SD card recording, motion detection, two-way speaker system, IR light. Picture quality of this camera is good also. Unfortunately the latest firmware caused the camera does not work behind the window glass, because Foscam decided to combine PIR motion detector and video motion detector together. This problem persist since may 2015 and is not solved still (Foscam firmware V-2.x.2.16-20150918). For anybody who wouldn’t to wait next months for new firmware release (I’m not sure they able to fix that anyway) and have basic manual experience with electronic circuits here is solution.
I decided to disable PIR motion detector completely (is useless behind windows glass). This solution is reversible in case if Foscam will fix this problem in the feature.

CAUTION!
I’m not taking any responsibility for any damages, guaranty loss etc. This is Your decision.

If You’re OK with that follow next steps:

  1. Carefully remove the camera faceplate

P60104-140851

 

 

 

 

 

 

 

 

 

 

 

 

P60104-140914

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P60104-140945

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Unscrew the plastic body ring

P60104-141026

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Unscrew the top circuit board

P60104-141141

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4. Remove lenses and take apart top circuit.

P60104-141736

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5. Now very important step. You must bend the PIN connector (don’t cut!) as on picture below. This PIN is connection to PIR from the top circuit board to bottom circuit and must be disconnected.

P60104-192007

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. On the bottom circuit board You must solder 47k (47kOhm) resistor as on the pictures below:

P60104-191722

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P60104-191641

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Now piece everything together, check connections and adjust the focus. I have 2 cameras working well with motion detection behind the window after this modifications.

Good luck.

 

Inteligentny dom, to możesz mieć już dziś.

Inteligentna hacjenda

Inteligentne domy to już nie tylko „Science fiction” ale rzeczywistość. Coraz częściej takie systemy pojawiają się w domach zwykłych ludzi, nie tylko za granicą. W Polsce co prawda ten rynek się dopiero rozwija ale jednak jest już obecny i powoli rośnie. Niestety takie rozwiązania są dość kosztowne i większość ludzi nie może sobie na takie zabawki pozwolić. Zamiast kompleksowych systemów które swoją cenę mają naprawdę sporą jest wiele mniejszych urządzeń, które można samodzielnie skonfigurować. Takie rozwiązania są dużo tańsze ale też ograniczone.

więcej na: http://pecetowy.pl/gadzety/inteligentny-dom-z-mycroft-zapowiada-sie-ciekawie/

Źródło: www.pecetowy.pl